ARM上交叉编译蓝牙Bluez

应好友的求助，帮忙编译bluez
我的机器环境 Ubuntu 10.04
arm-none-linux-gnueabi-gcc 4.3.3源码下载的地方：
http://pkgs.fedoraproject.org/repo/pkgs/dbus-1.2.16.tar.gz downloadBluez交叉编译移植到arm linux .
Version：Bluez:3.36Gcc :arm-linux-gcc-3.4.1所需软件包：libxml2-2.7.4dbus1.0.2glib-2.16.5bluez-utils-3.36依赖于dbus和glib,而dbus依赖于libxml2,所以编译顺序是libxml,dbus,glib,bluez-utils-3.36.流程写的简单,其实在我自己的编译过程中出现了无数的问题,只是都简化到配置里面去了,所以configuare一定要配置好.1.编译bluez-libs-3.36./configure --host=arm-linux --prefix="$PWD/../release/bluez_libs"
make&make install
没有什么依赖库的问题，直接编译通过.2.编译libxml2-2.7.4./configure --prefix="$PWD/../release/bluez_libs" --host=arm-linux
make
make install没有依赖库，顺利通过3.编译dbus1.0.2echo ac_cv_have_abstract_sockets=yes>arm-linux.cache
./configure --prefix="$PWD/../release/bluez_libs" --host=arm-linux CC="arm-linux-gcc -I/home/jay/tools/bluez3/release/bluez_libs/include -L/home/jay/tools/bluez3/release/bluez_libs/lib" --cache-file=arm-linux.cache --with-x=no
--with-xml=libxml PKG_CONFIG_PATH="$PWD/../release/bluez_libs/lib/pkgconfig"
make&make install
顺利通过了4.编译glib-2.16.5echo ac_cv_type_long_long=yes>arm-linux.cache
echo glib_cv_stack_grows=no>>arm-linux.cache
echo glib_cv_uscore=no>>arm-linux.cache
echo ac_cv_func_posix_getgrgid_r=yes>>arm-linux.cache
echo ac_cv_func_posix_getpwuid_r=yes>>arm-linux.cache
./configure --prefix="$PWD/../release/bluez_libs" --host=arm-linux CC="arm-linux-gcc -I/home/jay/tools/bluez3/release/bluez_libs/include
-L/home/jay/tools/bluez3/release/bluez_libs/lib" --cache-file=arm-linux.cache PKG_CONFIG_PATH="$PWD/../release/bluez_libs/lib/pkgconfig"
#make
#make install5.编译bluez-utils-3.36.
./configure --prefix="$PWD/../release/bluez_libs" --host=arm-linux CC="arm-linux-gcc -I/home/jay/tools/bluez3/release/bluez_libs/include -L/home/jay/tools/bluez3/release/bluez_libs/lib -shared" PKG_CONFIG_PATH="$PWD/../release/bluez_libs/lib/pkgconfig" --disable-audio --enable-testmake&make install如果不追加-shared,会出现很讨厌的__fini_array_start错误.遇到storage.c:286: error: error: `ENOKEY" undeclared
修改storage.c 增加#define ENOKEY 161至此bluez编译完毕.
文件系统的制作:将sbin和bin下的文件复制进文件系统的sbin下面,lib文件需要的有libbluetooth.so
libbluetooth.so.2 libbluetooth.so.2.11.2libxml2.so
libxml2.so.2 libxml2.so.2.7.4libglib-2.0.so
libglib-2.0.so.0 libglib-2.0.so.0.1600.5libgmodule-2.0.so.0 libgmodule-2.0.so.0.1600.5前面是软链接,后面是本尊将etc文件夹复制过去.最后记得把hcidump（需要另外编译,没有任何难度）复制到sbin,它方便调试的以下是Leeu我的编译遇到的问题.libusb 要用到g++
./configure --prefix=/opt/libs --host=arm-linux CC="arm-none-linux-gnueabi-gcc" CXX=arm-none-linux-gnueabi-g++ dbus的编译，把下面整个一起执行USE_ARCH=32 NM=nm CC="arm-none-linux-gnueabi-gcc ${BUILD32}" ./configure --prefix=/opt/libs --host=arm-linux --target=arm-linux CC="arm-none-linux-gnueabi-gcc -I/opt/libs/include -L/opt/libs/lib" --cache-file=arm-linux.cache --with-x=no
否则会报libtool中 eval的错误4.编译glib-2.16.5echo ac_cv_type_long_long=yes>arm-linux.cache
echo glib_cv_stack_grows=no>>arm-linux.cache
echo glib_cv_uscore=no>>arm-linux.cache
echo ac_cv_func_posix_getgrgid_r=yes>>arm-linux.cache
echo ac_cv_func_posix_getpwuid_r=yes>>arm-linux.cache
./configure --prefix=/opt/libs --host=arm-linux CC="arm-none-linux-gnueabi-gcc -I/opt/libs/include -L/opt/libs/lib" --cache-file=arm-linux.cache PKG_CONFIG_PATH=/opt/libs/lib/pkgconfig#make
#make installbuluz-utils
./configure --prefix=/opt/libs --host=arm-linux CC="arm-none-linux-gnueabi-gcc -I/opt/libs/include -L/opt/libs/lib -shared" PKG_CONFIG_PATH=/opt/libs/lib/pkgconfig --disable-audio
去掉--enable-test
过程会报找不到yacc, flex等命令，安装命令即可这样就编译好了。