Welcome 微信登录

首页 / 数据库 / MySQL / VMware上安装Oracle 10g RAC-ASM+裸设备

操作系统版本RHEL5.5-64bit，Oracle10g，vmware workstation6.5，clusterware10.0.2版本的两台虚拟机双网卡，本地磁盘40G，共享磁盘9G，共享磁盘选择立即分配所有磁盘空间，两台虚拟机内存都是1.5G1.配置hosts文件可以让两台虚拟机可以通过名称互相解析
  1. 192.168.183.131 node1
  2. 192.168.183.132 node2
  3. 192.168.183.141 node1-vip
  4. 192.168.183.142 node2-vip
  5. 172.16.1.1 node1-priv
  6. 172.16.1.2 node2-priv
2.给虚拟机添加共享磁盘，首先在node1上面添加一块共享磁盘，选择分配全部的空间（虚拟机下一定要这么设置，否则会导致共享存储配置不成功）node1添加共享磁盘（sharedisk.vmdk）-开机-关机，然后编辑node1的虚拟机配置文件，添加如下选项：
  1. scsi1.present = "TRUE"
  2. scsi1.virtualDev = "lsilogic"
  3. scsi1.sharedBus = "VIRTUAL"
  4. scsi1:1.present = "TRUE"
  5. scsi1:1.mode = "independent-persistent"
  6. scsi1:1.fileName = "sharedisk.vmdk"
  7. scsi1:1.deviceType = "disk"
  9. disk.locking = "FALSE"
  10. diskLib.dataCacheMaxSize = "0"
  11. diskLib.dataCacheMaxReadAheadSize = "0"
  12. diskLib.dataCacheMinReadAheadSize = "0"
  13. diskLib.dataCachePageSize = "4096"
  14. diskLib.maxUnsyncedWrites = "0"
然后编辑node2的虚拟机配置文件，添加如下选项：
  1. scsi1.present = "TRUE"
  2. scsi1.virtualDev = "lsilogic"
  3. scsi1.sharedBus = "VIRTUAL"
  4. scsi1:1.present = "TRUE"
  5. scsi1:1.mode = "independent-persistent"
  6. scsi1:1.fileName = "D:vmware workstation ode1sharedisk.vmdk"
  7. scsi1:1.deviceType = "disk"
  9. disk.locking = "FALSE"
  10. diskLib.dataCacheMaxSize = "0"
  11. diskLib.dataCacheMaxReadAheadSize = "0"
  12. diskLib.dataCacheMinReadAheadSize = "0"
  13. diskLib.dataCachePageSize = "4096"
  14. diskLib.maxUnsyncedWrites = "0"
关闭虚拟机软件，然后分别打开两台虚拟机的电源，共享磁盘配置完毕3.oracle安装环境准备这里参照我以前的文章，oracle安装前期准备工作的设置http://lymrg.blog.51cto.com/1551327/754136在两个节点上面创建对应文件夹
  1. [root@node1 oracle]# ll
  2. 总计 12
  3. drwxr-xr-x 2 oracle oinstall 409603-0816:08 oraasm
  4. drwxr-xr-x 2 oracle oinstall 409603-0816:08 orabase
  5. drwxr-xr-x 2 root oinstall 409603-0816:08 oracrs
这里oracle的变量设置做下更改
  1. PATH=$PATH:$HOME/bin
  2. export ORACLE_BASE=/home/oracle/orabase
  3. export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
  4. export ORA_CRS_HOME=/home/oracle/oracrs/product/10.2.0/crs
  5. export ORA_ASM_HOME=/home/oracle/oraasm/product/10.2.0/asm
  6. export ORACLE_SID=orcl1 PATH=$PATH:$ORACLE_HOME/bin:$ORA_CRS_HOME/bin:$ORA_ASM_HOME/bin
  7. export PATH
4.建立hangcheck模块加载（在两个节点上面操作） 
  1. [root@node1 ~]# find /lib/modules -name "hangcheck-timer.ko"
  2. [root@node1 ~]# vi /etc/modprobe.conf
  3. options hangcheck-timer hangcheck_tick=30 hangcheck_margin=180
  4. [root@node1 ~]# vi /etc/rc.local
  5. /sbin/modprobe hangcheck_timer
  6. 启动 /sbin/modprobe hangcheck_timer
  7. 查看启动是否成功
  8. [root@node1 ~]# grep hangcheck /var/log/messages|tail -2
  9. Mar 1215:25:47 node1 kernel: Hangcheck: starting hangcheck timer 0.9.0 （tick is30 seconds, margin is180 seconds）.
 5.配置两台机器无密码访问,这里的配置要在两个节点上面进行（1）以oracle 用户登录（2）在oracle 用户的主目录内创建.ssh 目录并设置正确的权限
  1. [oracle@node1 ~]$ mkdir ~/.ssh
  2. [oracle@node1 ~]$ chmod 700 ~/.ssh
  3. [oracle@node1 ~]$ ssh-keygen -t rsa
  4. Generating public/private rsa key pair.
  5. Enter file in which to save the key （/home/oracle/.ssh/id_rsa）:
  6. Enter passphrase （empty for no passphrase）:
  7. Enter same passphrase again:
  8. Your identification has been saved in /home/oracle/.ssh/id_rsa.
  9. Your public key has been saved in /home/oracle/.ssh/id_rsa.pub.
  10. The key fingerprint is:
  11. 17:e4:7c:79:8d:a0:00:3b:d9:f7:7a:56:f3:ac:54:4d oracle@node1
  13. [oracle@node1 ~] $ cd ~/.ssh
  14. [oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_rsa.pub >>
  15. authorized_keys
  16. [oracle@node1 .ssh]$ ssh node2 cat /home/oracle/.ssh/id_dsa.pub
  17. >>authorized_keys
  18. [oracle@node1 .ssh]$ scp authorized_keys node2:/home/oracle/.ssh/
  19. [oracle@node1 .ssh]$ chmod 600 ~/.ssh/authorized_keys
完成后，在node1 上执行：
  1. [oracle@node1 ~]$ ssh node1 date
  2. [oracle@node1 ~]$ ssh node2 date
如果不需要输入密码就出现系统日期，说明SSH 配置成功。6.磁盘规划这里我把共享磁盘分成6个区，sdb1和sdb2配制成裸设备，作为OCR镜像，sdb5,6,7也配置成裸设备，作votedisk镜像，sdb配置成ASM用来存放数据库
  1. fdisk -l
  2. Disk /dev/sdb: 9663 MB, 9663676416 bytes
  3. 255 heads, 63 sectors/track, 1174 cylinders
  4. Units = cylinders of 16065 * 512 = 8225280 bytes
  6. Device Boot Start End Blocks Id System
  7. /dev/sdb1 16350601683 Linux
  8. /dev/sdb2 64126506047+ 83 Linux
  9. /dev/sdb3 127117484180605 Extended
  10. /dev/sdb5 12718950601683 Linux
  11. /dev/sdb6 19025250601683 Linux
  12. /dev/sdb7 25331550601683 Linux
  13. /dev/sdb8 3161174689988683 Linux
 配置裸设备
  1. vi /etc/udev/rules.d/60-raw.rules
  2. ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N"
  3. ACTION=="add", KERNEL=="sdb2", RUN+="/bin/raw /dev/raw/raw2 %N"
  4. ACTION=="add", KERNEL=="sdb5", RUN+="/bin/raw /dev/raw/raw3 %N"
  5. ACTION=="add", KERNEL=="sdb6", RUN+="/bin/raw /dev/raw/raw4 %N"
  6. ACTION=="add", KERNEL=="sdb7", RUN+="/bin/raw /dev/raw/raw5 %N"
  7. ACTION=="add", KERNEL=="sdb8", RUN+="/bin/raw /dev/raw/raw6 %N"
  9. KERNEL=="raw1", OWNER="root", GROUP="oinstall", MODE="660"
  10. KERNEL=="raw2", OWNER="root", GROUP="oinstall", MODE="660"
  11. KERNEL=="raw3", OWNER="root", GROUP="oinstall", MODE="660"
  12. KERNEL=="raw4", OWNER="root", GROUP="oinstall", MODE="660"
  13. KERNEL=="raw5", OWNER="root", GROUP="oinstall", MODE="660"
  14. KERNEL=="raw6", OWNER="oracle", GROUP="oinstall", MODE="664"
  16. [root@node1 ~]# start_udev
  17. 启动 udev： [确定]
  18. [root@node1 ~]# ll /dev/raw/raw*
  19. crw-rw---- 1 root oinstall 162, 103-1122:43 /dev/raw/raw1
  20. crw-rw---- 1 root oinstall 162, 203-1122:43 /dev/raw/raw2
  21. crw-rw---- 1 root oinstall 162, 303-1122:43 /dev/raw/raw3
  22. crw-rw---- 1 root oinstall 162, 403-1122:43 /dev/raw/raw4
  23. crw-rw---- 1 root oinstall 162, 503-1122:43 /dev/raw/raw5
  24. crw-rw-r-- 1 oracle oinstall 162, 603-1122:43 /dev/raw/raw6
在node2上面执行 partprobe,然后同样建立裸设备7.在两个节点上面安装,注意要下载和自己内核版本对应的包
  1. rpm -ivh oracleasm-support-2.1.7-1.el5.x86_64.rpm
  2. rpm -ivh oracleasm-2.6.18-194.el5-2.0.5-1.el5.x86_64.rpm
  3. rpm -ivh oracleasmlib-2.0.4-1.el5.x86_64.rpm
在两个节点上面执行/etc/init.d/oracleasm configure分别输入oracle,dba,y,y在node1上面配置ASM
  1. [root@node1 ~]#/etc/init.d/oracleasm createdisk VOL1 /dev/sdb8
  2. [root@node1 ~]#/etc/init.d/oracleasm scandisks
  3. [root@node1 ~]#/etc/init.d/oracleasm listdisks
  4. VOL1
在node2上面执行扫描（不需要配置）
  1. /etc/init.d/oracleasm scandisks
  2. /etc/init.d/oracleasm listdisks
  3. VOL1
8.开启安装进程，在两个节点上面以root用户身份运行然后切换到oracle用户，开始安装clusterware1）选择CRS的安装目录2）两个集群节点的配置3）选择eth0网卡为公网IP4）配置OCR存储位置5）配置votedisk存储位置6）安装7）执行最后的安装脚本在节点node1上面执行
  1. [root@node1 oracrs]# /home/oracle/orabase/oraInventory/orainstRoot.sh
  3. Changing permissions of /home/oracle/orabase/oraInventory to 770.
  5. Changing groupname of /home/oracle/orabase/oraInventory to oinstall.
  7. The execution of the script is complete
在节点node2上面执行
  1. [root@node2 oracrs]# /home/oracle/orabase/oraInventory/orainstRoot.sh
  3. Changing permissions of /home/oracle/orabase/oraInventory to 770.
  5. Changing groupname of /home/oracle/orabase/oraInventory to oinstall.
  7. The execution of the script is complete
在节点node1上面执行
  1. [root@node1 oracle]# /home/oracle/oracrs/product/10.2.0/crs/root.sh
在节点node2上面执行
  1. [root@node2 oracle]# /home/oracle/oracrs/product/10.2.0/crs/root.sh
安装结束，查看节点状态
  1. [root@node2 bin]# ./crs_stat -t
  2. Name Type Target State Host
  3. ------------------------------------------------------------
  4. ora.node1.gsd application ONLINE ONLINE node1
  5. ora.node1.ons application ONLINE ONLINE node1
  6. ora.node1.vip application ONLINE ONLINE node1
  7. ora.node2.gsd application ONLINE ONLINE node2
  8. ora.node2.ons application ONLINE ONLINE node2
  9. ora.node2.vip application ONLINE ONLINE node2
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 下一页
Oracle 10g rac升级到10.2.0.5Oracle rac节点资源状态异常相关资讯      ASM  Oracle 10g RAC 
  • Oracle 11g RAC 启动时无法识别ASM  （今 15:36）
  • Oracle 10G RAC一节点系统重做后修  （06月26日）
  • 监控ASM磁盘组IO吞吐量  （04月10日）
  • Oracle Linux6.7下使用udev做ASM  （07月04日）
  • Oracle 10g RAC修改IP/VIP地址示例  （04月27日）
  • ASM学习之概述  （01月12日）
本文评论 查看全部评论 （0）
表情： 姓名： 字数