1.新增磁盘进行分区这里我们将新增磁盘分成3部分:/dev/sdb1,/dev/sdb2,/dev/sdb3[root@ocp db10g]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won"t be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): p
Disk /dev/sdb: 6442 MB, 6442450944 bytes
255 heads, 63 sectors/track, 783 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-783, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-783, default 783): +2G
Command (m for help): p
Disk /dev/sdb: 6442 MB, 6442450944 bytes
255 heads, 63 sectors/track, 783 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 244 1959898+ 83 Linux
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (245-783, default 245):
Using default value 245
Last cylinder or +size or +sizeM or +sizeK (245-783, default 783): +2g
Command (m for help): p
Disk /dev/sdb: 6442 MB, 6442450944 bytes
255 heads, 63 sectors/track, 783 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 244 1959898+ 83 Linux
/dev/sdb2 245 488 1959930 83 Linux
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 3
First cylinder (489-783, default 489):
Using default value 489
Last cylinder or +size or +sizeM or +sizeK (489-783, default 783):
Using default value 783
Command (m for help): p
Disk /dev/sdb: 6442 MB, 6442450944 bytes
255 heads, 63 sectors/track, 783 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 244 1959898+ 83 Linux
/dev/sdb2 245 488 1959930 83 Linux
/dev/sdb3 489 783 2369587+ 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
rac 命令 srvctl 报错使用YUM安装MySQL 5.5(适用于CentOS6.2/5.8及Fedora 17/16平台)相关资讯 VMware教程 Oracle数据库基础教程
- 在Oracle数据库中插入含有&符号的 (03/06/2013 09:20:14)
- Oracle 执行计划更改导致数据加工 (02/13/2013 14:45:04)
- 判断Oracle Sequence是否存在 (02/13/2013 14:32:26)
| - Oracle数据库中无法对数据表进行 (02/26/2013 14:24:58)
- Oracle 在同一台主机上建立用户管 (02/13/2013 14:40:58)
- Oracle em 无法启动,报not found错 (02/13/2013 14:29:48)
|
本文评论 查看全部评论 (0)