Fedora8下OpenSER安装设置攻略

OpenSER主页:http://www.openser.org下载:http://www.openser.org/pub/openser/latest-1.2.x/src/openser-1.2.2-tls_src.tar.gz准备试验平台为Fedora8, 预先装好了MYSQL-5.0.45;需要安装相应的MySQL-devel-5.0.45开发包，到这里下载http://ftp.plusline.de/mysql/Downloads/MySQL-5.0/MySQL-devel-5.0.45-0.i386.rpm最好为mysql设置一个root密码。编译
代码:
tar zxvf openser-1.2.2-tls_src.tar.gzcd openser-1.2.2-tls
make all
make prefix=/usr/local install # 预先我编译了几个测试的模块和mysql
make prefix=/usr/local include_modules="dialog sl mysql" modules
make prefix=/usr/local include_modules="dialog sl mysql" install
设置域名
* 如果你的机器有域名，直接使用就可以了，如果没有，可以编辑一下/etc/hosts，加上一行：
代码:
127.0.0.1    openser.fc8.home
* 把域名加入到root用户的OpenSER的资源文件中
代码:
export SIP_DOMAIN=openser.fc8.home
运行
代码:
/usr/local/sbin/openser_mysql.sh create 运行之后需要输入上面提到的mysql数据库的root密码。编辑配置文件
编辑/usr/local/etc/openser/openser.cfg，以下是我的配置，红色部分是需要修改的，不用多讲，看注释就明白啦！:）代码:
# ----------- global configuration parameters ------------------------debug=3            # debug level （cmd line: -dddddddddd）
fork=yes
log_stderror=no    # （cmd line: -E）
children=4
#dns=yes
#rev_dns=yes# Uncomment these lines to enter debugging mode
#fork=no
#log_stderror=yes
#
# 这里是使用调试模式，可以将这两个参数打开调试你的配置文件是否
有错
port=5060# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"# ------------------ module loading ----------------------------------#set module path
mpath="/usr/local/lib/openser/modules/"
# Uncomment this if you want to use SQL database
loadmodule "mysql.so"loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"# Uncomment this if you want digest authentication
# mysql.so must be loaded ！
loadmodule "auth.so"
loadmodule "auth_db.so"# ----------------- setting module-specific parameters ---------------# -- mi_fifo params --modparam（"mi_fifo", "fifo_name", "/tmp/openser_fifo"）# -- usrloc params --modparam（"usrloc", "db_mode",   0）# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam（"usrloc", "db_mode", 2）# -- auth params --
# Uncomment if you are using auth module
#
modparam（"auth_db", "calculate_ha1", yes）
#
# If you set "calculate_ha1" parameter to yes （which true in this config）,
# uncomment also the following parameter）
#
modparam（"auth_db", "password_column", "password"）# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam（"rr", "enable_full_lr", 1）# ------------------------- request routing logic -------------------# main routing logicroute{        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if （！mf_process_maxfwd_header（"10"）） {
                sl_send_reply（"483","Too Many Hops"）;
                exit;
        };        if （msg:len >= 2048 ） {
                sl_send_reply（"513", "Message too big"）;
                exit;
        };        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that"s
        # particularly good if upstream and downstream entities
        # use different transport protocol
        if （！method=="REGISTER"）
                record_route（）;        # subsequent messages withing a dialog should take the
        # path determined by record-routing        if （loose_route（）） {
                # mark routing logic in request
                append_hf（"P-hint: rr-enforced "）;
                route（1）;
        };        if （！uri==myself） {
                # mark routing logic in request
                append_hf（"P-hint: outbound "）;
                # if you have some interdomain connections via TLS
                #if（uri=~"@tls_domain1.net"） {
                #       t_relay（"tls:domain1.net"）;
                #       exit;
                #} else if（uri=~"@tls_domain2.net"） {
                #       t_relay（"tls:domain2.net"）;
                #       exit;
                #}
                route（1）;
        };        # if the request is for other domain use UsrLoc
        # （in case, it does not work, use the following command
        # with proper names and addresses in it）
        if （uri==myself） {                if （method=="REGISTER"） {                        # Uncomment this if you want to use digest authentication
                        if （！www_authorize（"openser.org", "subscriber"）） {
                                www_challenge（"openser.org", "0"）;
                                exit;
                        };                        save（"location"）;
                        exit;
                };
                lookup（"aliases"）;
                if （！uri==myself） {
                        append_hf（"P-hint: outbound alias "）;
                        route（1）;
                };                # native SIP destinations are handled using our USRLOC DB
                if （！lookup（"location"）） {
                        sl_send_reply（"404", "Not Found"）;
                        exit;
                };
                append_hf（"P-hint: usrloc applied "）;
        };        route（1）;
}
route[1] {
        # send it out now; use stateful forwarding as it works reliably
        # even for UDP2TCP
        if （！t_relay（）） {
                sl_reply_error（）;
        };
        exit;
}

代码:
/usr/local/sbin/openserctl add 8001 1111 8001@tcl.com

Linux操作系统下安装Oracle数据库体会心得新手学堂最常用Oracle 命令集锦相关资讯 Fedora8 OpenSER

Ubuntu下安装配置openser 1.3.1 （09/24/2008 06:18:35）
Fedora7、Fedora8、Fedora9 安装截（06/03/2008 06:20:25）
Fedora 8 更新提示插入光盘问题的（05/11/2008 16:16:55）

Fedora8下aMule和Azureus设置心得（06/11/2008 05:56:35）
Fedora8 Gnome桌面环境下安装EVA （05/13/2008 05:46:47）
Fedora 8下用Wine 0.9.58 跑QQ2008 （05/11/2008 13:14:05）

本文评论查看全部评论（0）